Studi Eksperimental Pengaruh Variasi Sudut Kemiringan Poros Terhadap Kinerja Turbin Ulir Archimedes
Abstract
This study aims to design and conduct an experimental study of axle tilt angles variation on the performance of the Archimedes screw turbine (AST). The AST was constructed based on Rorres (2000) [3] formulation to achieve the optimum design of AST. This design was obtained with the followings parameters: 1.7m turbine axle length, 0.069m and 0.128m of internal and external turbine radius, 0.260m pitch length, 6.5 pitches number, 59° and 72° of external and internal blade angel, and 2 number of blades. The screw turbine performance was experimentally carried out by varying the angle of the turbine axle in the range of 25°, 30°, 35°, 40°, and 45°. The test was utilized the natural river flow with an average discharge of 0.011 m3/s. The result was yielded that the optimum angle of the turbine was at a turbine tilt axle of 35° while the rotational speed was 265.5 rpm, whereby the turbine generated 48.81W power and 4.09Nm of torque. This study is hopefully beneficial for the turbine design reference as well as its experimental evaluation.
Downloads
References
[2] S. Waters and G. A. Aggidis, “Over 2000 years in review: Revival of the Archimedes Screw from Pump to Turbine,” Renew. Sustain. Energy Rev., vol. 51, no. 497–505, 2015.
[3] C. Rorres, “The Turn of the Screw: Optimal Design of an Archimedes Screw,” J. Hydraul. Eng., vol. 126, no. 1, 2000.
[4] G. Müller and J. Senior, “Simplified theory of Archimedean screws,” J. Hydraul. Res., vol. 47, no. 5, 2009.
[5] A. YoosefDoost and W. D. Lubitz, “Archimedes screw turbines: A sustainable development solution for green and renewable energy generation-a review of potential and design procedures,” Sustain., vol. 12, no. 18, 2020, doi: 10.3390/SU12187352.
[6] A. Havendri and I. Arnif, “Kaji Eksperimental Penentuan Sudut Ulir Optimum Pada Turbin Ulir Untuk Data Perancangan Turbin Ulir Pada Pusat Listrik Tenaga Mikrohidro (PLTMH) dengan Head Rendah,” Semin. Nas. Tah. Tek. Mesin 9, vol. 9, pp. 274–278, 2010.
[7] Erinofiardi et al., “Experimental Study of Screw Turbine Performance based on Different Angle of Inclination,” Energy Procedia, vol. 110, no. December 2016, pp. 8–13, 2017, doi: 10.1016/j.egypro.2017.03.094.
[8] H. Budi Harja, H. Abdurrahim, S. Yoewono, and H. Riyanto, “Penentuan Dimensi Sudu Turbin dan Sudut Kemiringan Poros Turbin pada Turbin Ular Archimedes,” Met. Indones., vol. 36, no. 1, p. 26, 2016, doi: 10.32423/jmi.2014.v36.26-33.
[9] Y. Hizhar, B. Yulistianto, and S. Darmo, “Rancang Bangun dan Studi Eksperimental Pengaruh Perbedaan Jarak Pitch dan Kemiringan Poros terhadap Kinerja Mekanik Model Turbin Ulir 2 Blade Pada Aliran Head Rendah,” Met. J. Sist. Mek. dan Termal, vol. 1, no. 1, p. 27, 2017, doi: 10.25077/metal.1.1.27-34.2017.
[10] H. F. Abdillah, O. Dinaryanto, and B. Jalaali, “Manufacturing process and experimental study of a small scale archimedes hydro powerplant by varying the number of blade,” Angkasa J. Ilm. Bid. Teknol., vol. 14, no. 1, pp. 65–74, 2022, doi: 10.28989/angkasa.v14i1.1221.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
All the content on Journal of Science and Applicative Technology (JSAT) may be used under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License.
You are free to:
- Share - copy and redistribute the material in any medium or format
- Adapt - remix, transform, and build upon the material
Under the following terms:
- Attribution - You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- NonCommercial - You may not use the material for commercial purposes.
- No additional restrictions - You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
