PERANCANGAN TATA LETAK LABORATORIUM PAKAN DENGAN METODE COMPUTERIZED RELATIONSHIP LAYOUT PLANNING DI INDUSTRI PENGGEMUKAN SAPI
Abstract
Feed laboratory is a facility that guarantees feed quality in the feedlot industry. But the existence of this laboratory has not been fully considered both in terms of facilities and layout that ease the movement of workers. This research aims to analyze machine and raw material properties in the feed laboratory, to find total closeness rating between facilities according the need and designing the layout of facilities in the laboratory that can streamline the material flow. The problem is how to design facility layout in feed laboratory which has different tool and machine characteristics in limited space, how to plan material flow that can minimize work flow. The method used is computerized relationship layout planning (CORELAP). The result obtained is the design of the laboratory layout by comparing the optimum distance on the inter-work track. The calculation value from allocation relationship diagram showed the biggest total closseness rating is the testing room. From the calculation of the distance difference layout design, it is known that the second alternative provides a better solution with the largest distance difference of 41.52 for space with condition should be close and the distance difference of -31.21 for space with the condition should not be close.
Keyword: feed laboratory layout, feedlot industry, computherized relationship layout planning
Downloads
References
[2] A. R. S. Amaral, “On the exact solution of a facility layout problem,†Eur. J. Oper. Res., vol. 173, no. 2, pp. 508–518, 2006.
[3] A. Dhawan, D. K. Kasdekar, and S. Agrawal, “Layout Design and Evaluation Using Computer Relative Allocation of Facilities Technique,†in Proceedings International Conference, 2014, pp. 103–108.
[4] M. Faishol, S. Hastuti, and M. Ulya, “PERANCANGAN ULANG TATA LETAK FASILITAS PRODUKSI PABRIK TAHU SRIKANDI JUNOK BANGKALAN,†AGROINTEK J. Teknol. Ind. Pertan., vol. 7, no. 2, pp. 59–67, 2016.
[5] LIPI, “Masalah Pakan Jadi Kendala Pengembangan Sapi.,†2013. [Online]. Available: http://lipi.go.id/berita/single/Masalah-Pakan-Jadi-Kendala-Pengembangan-Sapi/8227 . [Accessed: 29-Mar-2017].
[6] J. A. Tompkins, J. A. White, Y. A. Bozer, and J. M. A. Tanchoco, Facilities planning. John Wiley & Sons, 2010.
[7] S. S. Heragu, Facilities design. Crc Press, 2018.
[8] M. Kriel, “Optimizing facility layout through simulation,†2010.
[9] N. P. A. Hidayat, “Layout Design on Finishing Department of CV. SG-Bandung,†Ind. Eng. J., pp. 137–146, 2011.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
All the content on Journal of Science and Applicative Technology (JSAT) may be used under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License.
You are free to:
- Share - copy and redistribute the material in any medium or format
- Adapt - remix, transform, and build upon the material
Under the following terms:
- Attribution - You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- NonCommercial - You may not use the material for commercial purposes.
- No additional restrictions - You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.