Karakteristik Aspal Porus dengan Campuran Serat Bemban (Donax Canniformis) Terhadap Porositas, Void In Mixture, dan Marshall Quotient

  • Yoga Saputra Program Studi Fisika FMIPA, Universitas Lambung Mangkurat, Banjarbaru, Kalimantan Selatan, Indonesia, 70714
  • Asri Wiana Lika Zahara Program Studi Fisika FMIPA, Universitas Lambung Mangkurat, Banjarbaru, Kalimantan Selatan, Indonesia, 70714
  • Muhammad Alif Lazuardi Program Studi Teknik Sipil FT, Universitas Lambung Mangkurat, Banjarbaru, Kalimantan Selatan, Indonesia, 70714
  • Nur Maeysya Saida Amada Program Studi Teknik Sipil FT, Universitas Lambung Mangkurat, Banjarbaru, Kalimantan Selatan, Indonesia, 70714
  • Ninis Hadi Haryanti Program Studi Fisika FMIPA, Universitas Lambung Mangkurat, Banjarbaru, Kalimantan Selatan, Indonesia, 70714
DOI: https://doi.org/10.35472/jsat.v7i1.1090

Abstract

The need for additional materials to improve the quality of porous asphalt that is environmentally friendly, the  natural fiber is the right component. Bemban is a typical South Kalimantan plant that has good properties as a mixture material. This research was conducted to identify the characteristics of bemban fiber as a porous asphalt mixture material and identify the characteristics of porous asphalt with bemban fiber mixture. The characteristics measurement of bemban fiber includes moisture content, cellulose content, and lignin content, making asphalt specimens with bemban fiber mixture using variations of 1, 2, and 3 (%W/W), and porous asphalt characterization including porosity, Marshall Quotient (MQ), and Void in the Mixtures (VIM) with the Australian Asphalt Pavement Association (AAPA) 2004 reference standard. The results show the characteristics of bemban fiber with NaOH treatment 30 minutes 28oC obtained moisture content 2.36, cellulose content 22.52, and lignin content 1.33 (%W/W) which was used as a porous asphalt mixture. Characteristics of porous asphalt with variations of bemban fiber obtained optimum porosity, MQ, VIM values at the addition of bemban fiber 1 (%W/W) and has met the specification parameters.

Downloads

Download data is not yet available.

Author Biographies

Yoga Saputra, Program Studi Fisika FMIPA, Universitas Lambung Mangkurat, Banjarbaru, Kalimantan Selatan, Indonesia, 70714

Program Studi Fisika FMIPA, Universitas Lambung Mangkurat, Banjarbaru, Kalimantan Selatan, Indonesia, 70714

Asri Wiana Lika Zahara, Program Studi Fisika FMIPA, Universitas Lambung Mangkurat, Banjarbaru, Kalimantan Selatan, Indonesia, 70714

Program Studi Fisika FMIPA, Universitas Lambung Mangkurat, Banjarbaru, Kalimantan Selatan, Indonesia, 70714

Muhammad Alif Lazuardi, Program Studi Teknik Sipil FT, Universitas Lambung Mangkurat, Banjarbaru, Kalimantan Selatan, Indonesia, 70714

Program Studi Teknik Sipil FT, Universitas Lambung Mangkurat, Banjarbaru, Kalimantan Selatan, Indonesia, 70714

Nur Maeysya Saida Amada, Program Studi Teknik Sipil FT, Universitas Lambung Mangkurat, Banjarbaru, Kalimantan Selatan, Indonesia, 70714

Program Studi Teknik Sipil FT, Universitas Lambung Mangkurat, Banjarbaru, Kalimantan Selatan, Indonesia, 70714

Ninis Hadi Haryanti, Program Studi Fisika FMIPA, Universitas Lambung Mangkurat, Banjarbaru, Kalimantan Selatan, Indonesia, 70714

Program Studi Fisika FMIPA, Universitas Lambung Mangkurat, Banjarbaru, Kalimantan Selatan, Indonesia, 70714

References

[1] N. Ali, J. T. Sipil, and U. Hasanuddin, “Studi Penggunaan Serat Ijuk Sebagai Bahan Tambah Pada Aspal 2 . Program Eksperimen,” vol. 7, no. KoNTekS 7, pp. 24–26, 2013.
[2] R. T. Jurnal, “Pemanfaatan Material Lokal Dalam Pembuatan Aspal Porus Tipe Ac-Wc Yang Aman Dan Ramah Lingkungan,” Forum Mek., vol. 7, no. 2, 2019, doi: 10.33322/forummekanika.v7i2.199.
[3] N. T. Sembung, T. K. Sendow, and ..., “Analisa Campuran Aspal Porus Menggunakan Material Dari Kakaskasen Kecamatan Tomohon Utara Kota Tomohon,” J. Sipil …, vol. 8, no. 3, pp. 345–352, 2020.
[4] M. F. Syaviq, M. Z. Arifin, H. Bowoputro, L. Djakfar, and L. Ambarwati, “Studi Pengaruh Penambahan Serabut Kelapa Terhadap Karakteristik Marshall Pada Campuran Aspal Porus,” Rekayasa Sipil, vol. 12, no. 2, pp. 92–98, 2018.
[5] A. K. P. Arthadena, “Analisis Karakteristik Campuran Aspal Porus Dengan Menggunakan Serat Ijuk Dan Serat Serabut Kelapa,” Universitas Mataram, 2020.
[6] A. Syarief and A. Yafie, “Sifat Material Polyester Hybrid Composite - Batang Bemban (Donax Canniformis),” Sci. J. Mech. Eng. Kinemat., vol. 2, no. 2, pp. 97–104, 2017.
[7] H. H. Ihsan, “Skrining Fitokimia dan Aktivitas Antibakteri dari Daun Bamban (Donax canniformis) untuk Formulasi Obat dari Bahan Alam (Phytochemical Screening and Antibacterial Activity of Donax canniformis for The Formulation Medicine from Natural Ingredients),” J. Ris. Ind. Has. Hutan, vol. 9, no. 1, pp. 29–40, 2017.
[8] A. Syarief, A. A. Basyir, and A. N. Andy Nugraha, “Pengaruh Orientasi Serat Dan Waktu Alkalisasi Pada Laminates Composite Polyester-Serat Bemban (Donax Canniformis) Terhadap Kekuatan Bending, Impact Dan Bentuk Patahan,” Info-Tek., vol. 22, no. 2, p. 209, 2021.
[9] S. M. F. Al-idrus, J. Arifin, and F. Herlina, “Perbandingan Komposit Polyester Serat Bemban ( Donax Canniformis ), Timbaran , Dan Bilaran Terhadap Kekuatan Impak Dan Bending” pp. 1–4, 2020.
[10] A. A. Basyir, “Pengaruh Orientasi Serat Dan Waktu Alkalisasi Pada Laminates Composite Polyester-Serat Bemban (Donax Canniformis) Terhadap Kekuatan Bending, Impact Dan Bentuk Patahan,” Universitas Lambung Mangkurat, 2019.
[11] Suhardi, “Pengaruh Fraksi Volume Terhadap Sifat Mekanik Chopped Fiber Composite Serat Bemban (Donax Canniformis),” Universitas Lambung Mangkurat, 2019.
[12] Y. A. Priambodo and K. M, “Jurnal SIPILsains,” J. Sipilsains, vol. 10 2, no. September, pp. 151–156, 2020.
Published
2023-05-06
How to Cite
SAPUTRA, Yoga et al. Karakteristik Aspal Porus dengan Campuran Serat Bemban (Donax Canniformis) Terhadap Porositas, Void In Mixture, dan Marshall Quotient. Journal of Science and Applicative Technology, [S.l.], v. 7, n. 1, p. 20-25, may 2023. ISSN 2581-0545. Available at: <https://journal.itera.ac.id/index.php/jsat/article/view/1090>. Date accessed: 16 may 2024. doi: https://doi.org/10.35472/jsat.v7i1.1090.
Citation Formats
Issue
Vol 7 No 1 (2023): Journal of Science and Applicative Technology June Chapter
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Creative Commons License

All the content on Journal of Science and Applicative Technology (JSAT) may be used under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License.

You are free to:

  • Share - copy and redistribute the material in any medium or format
  • Adapt - remix, transform, and build upon the material

Under the following terms:

  • Attribution - You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • NonCommercial - You may not use the material for commercial purposes.
  • No additional restrictions - You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.