Aplikasi Fuzzy Linier Programming dengan Metode Branch and Bound untuk Mengoptimalkan Jumlah Produksi dan Keuntungan Penjualan Roti di Italia Bakery Bandar Lampung

Achmad Suryadi Nasution; Fatin Trihastuti; Sri Efrinita Irwan

doi:10.35472/indojam.v2i2.1030

Achmad Suryadi Nasution Institut Teknologi Sumatera
Fatin Trihastuti Program Studi Matematika, Jurusan Sains, Institut Teknologi Sumatera
Sri Efrinita Irwan Program Studi Matematika, Jurusan Sains, Institut Teknologi Sumatera

DOI: https://doi.org/10.35472/indojam.v2i2.1030

Abstract

Italia Bakery is one of the bakeries in Bandar Lampung that produces various types of sandwiches, namely meat bread, and green bean bread. The Italian Bakery factory has difficulty in determining the optimal amount of bread production as well as controlling the right amount of raw materials. This causes losses for the factory because bread that is not worth the market will be thrown away, as a result of which the profits obtained do not reach the maximum limit. This problem can be solved by planning the optimal production amount based on the amount of raw material supply and the amount of demand with fuzzy linear programming methods. Results that have been completed with fuzzy linear programming that is still a fractional number can be rounded using the branch and bound method. Based on the results of research conducted, it is known that the use of both methods can increase the company's profits by 8,17%.

Downloads

Download data is not yet available.

References

[1] L. Costaner, W. Syafitri, and G. Guntoro, “Optimasi Jumlah Produksi Roti UD Prima Sari Menggunakan Metode Logika Fuzzy,” Sistemasi: Jurnal Sistem Informasi, vol. 8, no. 3, pp. 424–435, 2019.
[2] A. W. Yulianto, H. Suyitno, and M. Mashuri, “Aplikasi Fuzzy Linear Programming Dalam Optimalisasi Produksi,” UNNES Journal of Mathematics, vol. 1, no. 1, 2012.
[3] W. Hartono, A. D. Y. A. Putri, and Sugiyarto, “Integer Programming dengan Pendekatan Metode Branch And Bound untuk Optimasi Sisa Material Besi (Waste ) pada Plat Lantai (Studi Kasus : Pasar Elpabes Banjarsari Surakarta),” e-Jurnal MATRIKS TEKNIK SIPIL, vol. 2, no. 2, Jul. 2014.
[4] Hartono, W, “Integer Programming dengan Pendekatan Metode Branch and Bound untuk Optimasi Sisa Material Besi (WASTE) Pada Plat Lantai”, e-Jurnal MATRIKS TEKNIK SIPIL, II(2), 86, 2014.
[5] D. R. Indah and P. Sari, “Penerapan Model Linear Programming Untuk Mengoptimalkan Jumlah Produksi Dalam Memperoleh Keuntungan Maksimal (Studi Kasus pada Usaha Angga Perabot),” Jurnal Manajemen Inovasi, vol. 10, no. 2, 2020.
[6] S. Mulyono, “Riset operasi, edisi revisi,” Indonesia. Jakarta: Fakultas Ekonomi Universitas, 2004.
[7] D arta and T. Kandaga, Program Linear dan Aplikasinya. Bandung: PT Refika Aditama, 2019.
[8] H. Suantio, M. Rambe, A. Jabbar, and I. Siregar, “Aplikasi Fuzzy Linear Programming untuk Produksi Bola Lampu di PT XYZ,” Jurnal Teknik Industri USU, vol. 2, no. 2, p. 219345, 2013.
[9] W. Wanayumini, “Menentukan Tingkat Produksi Maksimum dengan Teknik Artificial Intelligence Menggunakan Logika Fuzzy Linier Programming,” MEDIATEK (MEDIA TEKNIK): JURNAL ILMIAH DAN TEKNOLOGI, vol. 1, no. 1, 2012.
[10] M. Martini and others, “Optimasi Produksi Hijab dengan Fuzzy Linear Programming,” JITK (Jurnal Ilmu Pengetahuan dan Teknologi Komputer), vol. 3, no. 1, pp. 65–72, 2017.
[11] S. Kusumadewi and H. Purnomo, Aplikasi Logika Fuzzy untuk Pendukung Keputusan. Yogyakarta: Graha Ilmu, 2004.
[12] D. V. S. Sinaga, “Optimalisasi Keuntungan Penjualan Roti dengan Metode Branch and Bound,” Universitas Sumatera Utara, Medan, 2018.
[13] P. Sitorus, Program Linear. Jakarta: Universitas Trisakti, 1997.Sitorus, P, “Program Linear”, Jakarta: Universitas Trisakti, 1997.