The Application of Environmentally Friendly Technology for Student Learning Materials at SMA Tunas Mekar Indonesia Bandar Lampung

Amalia Oktavia; Ilham Marvie; Muhammad Iqbal

doi:10.35472/teknokreatif.v3i1.782

Amalia Oktavia Program Studi Teknik Perkeretaapian, Jurusan Teknologi Infrastruktur dan Kewilayahan, Institut Teknologi Sumatera.
Ilham Marvie Institut Teknologi Sumatera
Muhammad Iqbal Program Studi Teknik Industri, Jurusan Teknologi Produksi dan Industri, Institut Teknologi Sumatera.

DOI: https://doi.org/10.35472/teknokreatif.v3i1.782

Abstract

High school students are one of the objects in introducing and understanding environmentally friendly technologies such as the development of solar panel tools and rainwater harvesting tools. Bandar Lampung is one of the cities that receive up to 9 hours of long sun in the summer and has high rainfall during the rainy season. Therefore, this community service program can be a means to bring this technology into the school learning process. This program aims to increase the interest of SMA Tunas Mekar Indonesia students in learning environmentally friendly technology; besides that, this activity also aims to increase students' understanding of the importance of applying solar panel technology and rainwater harvesting equipment. The method used consists of the observation stage, analysis stage, the tool's planning and design, and implementation and evaluation stages. Based on the pre-test and post-test results given during the training, this program succeeded in increasing interest and increasing students' understanding of the importance of implementing environmentally friendly technologies.

References

[1] K. R. Saputra, I. P. S. Arsa, and I. G. Ratnaya, “Pengembangan Media Pembelajaran Pembangkit Listrik Tenaga Surya Pada Mata Kuliah Pembangkit Listrik di Program Studi S1 Pendidikan Teknik Elektro,” J. Pendidik. Tek. Elektro Undiksha, vol. 9, no. 3, pp. 193–202, 2020.
[2] M. S. Anrokhi, M. Y. Darmawan, A. Komarudin, K. Kananda, and D. L. Puspitarum, “Analisis Potensi Energi Matahari di Institut Teknologi Sumatera: Pertimbangan Faktor Kelembaban dan Suhu,” J. Sci. Appl. Technol., vol. 3, no. 2, pp. 89–92, 2019.
[3] I. Maysha, B. Trisno, and Hasbullah, “Pemanfaatan Tenaga Surya Mengguakan Rancangan Panel surya berbasis transistor 2N3055 dan Thermoelectric Cooler (TEC),” Electrans, vol. 12, no. 2, pp. 89–96, 2013.
[4] Susilowati and I. Sadad, “Analisa Karakteristik Curah Hujan di Kota Bandar Lampung,” J. Konstr., vol. 7, no. 1, pp. 13–26, 2015.
[5] Rofil and Maryono, “otensi dan Multifungsi Rainwater Harvesting (Pemanenan Air Hujan) di Sekolah bagi Infrastruktur Perkotaan,” in Proceeding Biology Education Conference, 2017, pp. 247–251.
[6] A. R. Apriliawan, Madi, S. Muslimah, A. Juliana, and M. P. Ali, “Analisis Kepuasan Masyarakat Terhadap Penerapan dan Edukasi Panel Surya sebagai Destilasi Air Laut di Pulau Rimau Lampung Selatan,” TeknoKreatifJurnal Pengabdi. Kpd. Masy., vol. 1, no. 2, pp. 98–110, 2021.
[7] R. M. A. Kinasti et al., “Sosialisasi dan Instalasi Panel Surya Sebagai Energi Terbarukan Menuju Kesadaran Lingkungan Indonesia Bebas Emisi,” J. Pengabdi. Pada Masy. Menerangi Negeri, vol. 2, no. 1, pp. 16–24, 2019.
[8] S. M. Hadiningrat, R. Ardiansyah, E. A. R. Hadiningrat, R. Ardiansyah, and E. A. Rofiq, “Edukasi Pembangkit Listrik Tenaga Surya Buatan ‘Integrated Solar Panel-Sensitized Solar Cell’ Bagi Madrasah Aliyah NU Lekok dan Masyarakat Dusun Semongkrong, Pasinan, Pasuruan,” Abdimas Berdaya J. PengabdianMasyarakat, vol. 3, no. 2, pp. 92–98, 2020.
[9] F. Nailah and A. Masduqi, “Perencanaan Rainwater Harvesting dan Pengolahan Air Limbah di Pondok Pesantren Mambaul Ulum Bata-Bata Pamekasan,” J. Tek. ITS, vol. 7, no. 1, pp. 23–25, 2018.
[10] R. Kharisma, A. Yudono, and R. T. Lopa, “Pemanfaatan Rainwater Harvesting (Pemanenan Air Hujan) Berbasis Low Impact Development (Studi Kasus: Kawasan Pendidikan FT-UH Gowa),” in Prosiding Temu Ilmiah IPLBI, 2016, pp. 89–96.