Desain dan Analisis Mesin Press Komposit Kapasitas 20 Ton

Muhammad Syaukani; Fajar Paundra; Fitrah Qalbina; Ilham Dwi Arirohman; Putty Yunesti; Sabar Sabar

Muhammad Syaukani Program Studi Teknik Mesin, Jurusan Teknologi Produksi dan Industri, Institut Teknologi Sumatera
Fajar Paundra Program Studi Teknik Mesin, Jurusan Teknologi Produksi dan Industri, Institut Teknologi Sumatera
Fitrah Qalbina Program Studi Teknik Mesin, Jurusan Teknologi Produksi dan Industri, Institut Teknologi Sumatera
Ilham Dwi Arirohman Program Studi Teknik Sistem Energi, Institut Teknologi Sumatera
Putty Yunesti Program Studi Teknik Sistem Energi, Institut Teknologi Sumatera
Sabar Sabar

Abstract

Composite is a combination of several or more different materials, which produce better properties than their composition properties. The process of making composites can be done with a pressing method which can reduce voids. This pressing method can use a hydraulic press machine. This study aims to design and analyze a hydraulic press machine with a capacity of 20 tons. The design process begins with designing a 3D model using Solidwork Software. Numerical simulation using the finite element method by providing several variations in pressure loads ranging from 5-20 MPa. The results of the analysis show that the maximum von Mises stress is 79.70 MPa with a maximum deformation of 0.0176 mm and the smallest value of safety factor is 2.595. Based on these results, the press machine design is claimed to be safe to operate.